Cisco 9134 - MDS Multilayer Fabric Switch User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
20-37
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 20 Troubleshooting IP Storage Services
iSCSI Issues
iscsi:not enabled
authentication method:local <<<<<<<<<<<<<<<<<<<<
console:enabled
telnet/ssh:enabled
iscsi:enabled <<<<<<<<<<<<<<<<<<<<
switch#
If iSCSI is configured for RADIUS authentication, it should looks like this:
switch# show authentication
authentication method:none
console:not enabled
telnet/ssh:not enabled
authentication method:radius <<<<<<<<<<<<<<<<<<<
console:not enabled
telnet/ssh:not enabled
iscsi:enabled <<<<<<<<<<<<<<<<<<<
authentication method:local
console:enabled
telnet/ssh:enabled
iscsi:enabled
switch#
Troubleshooting User Name and Password Configuration
Check the client side user name and password with either the switch’s local configuration file or the
RADIUS server.
Verifying iSCSI User Account Configuration Using Fabric Manager
If iSCSI user authentication is through the switch’s local user database, choose Switches > Security >
Users and Roles and select the Users tab to verify that the iSCSI users are configured correctly with the
user name and password
Note The iSCSI password must be at least 16 characters.
Verifying iSCSI User Account Configuration Using the CLI
If iSCSI user authentication is through the switch’s local user database, use the show user-account
command to verify that the iSCSI users are configured correctly with the user name and password,
Note The iSCSI password must be at least 16 characters.
switch# show user-account iscsi
username:iscsi
secret:1234567812345678
username:iscsiuser
secret:1234567812345678

Cisco 9134 - MDS Multilayer Fabric Switch Specifications

General

Brand	Cisco
Model	9134 - MDS Multilayer Fabric Switch
Category	Switch
Language	English