Send documentation comments to mdsfeedback-doc@cisco.com
xxv
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
New and Changed Information
This chapter provides release-specific information for each new and changed troubleshooting guideline
for the Cisco MDS SAN-OS Release 3.x software. The Cisco MDS 9000 Family Troubleshooting Guide,
Release 3.x is updated to address each new and changed guideline in the Cisco MDS SAN-OS Release
3.x software. The latest version of this document is available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_troubleshooting_guides_list.html
Tip The troubleshooting guides created for previous releases are also listed in the website mentioned above.
Each guide addresses the features introduced in or available in those releases. Select and view the
troubleshooting guide pertinent to the software installed in your switch.
To check for additional information about Cisco MDS SAN-OS Release 3.x, refer to the Cisco MDS
9000 Family Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_release_notes_list.html
Table 1 summarizes the new and changed features for the Cisco MDS 9000 Family Troubleshooting
Guide, Release 3.x, and tells you where they are documented. The table includes a brief description of
each new feature and the release in which the change occurred.
Note This updated version of the Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x has been
reorganized from earlier versions to better address the most common troubleshooting issues in Cisco
SAN-OS Release 3.x.
Table 1 New and Changed Features for Release 3.x
Feature Description
Changed
in Release Where Documented
SANTap Not supported in 3.3(1). 3.3(1) Chapter 23, “Troubleshooting
SANTap”
CFS Regions Added troubleshooting information for CFS
Regions feature.
3.2(1) Chapter 7, “Troubleshooting
Cisco Fabric Services”
Configuration Limits Updated configuration limits for Cisco SAN-OS
features.
3.2(1) Appendix C, “Configuration
Limits for Cisco MDS SAN-OS
Release 3.x”
Fabric Manager Updated troubleshooting information for Fabric
Manager Web Client.
3.2(1) Chapter 26, “Troubleshooting
Fabric Manager”
To Next Page
Loading...
Need help?
General