Send documentation comments to mdsfeedback-doc@cisco.com
19-3
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 19 Troubleshooting FC-SP, Port Security, and Fabric Binding
Initial Troubleshooting Checklist
Begin troubleshooting fabric binding issues by checking the following issues:
Common Troubleshooting Tools in Fabric Manager
Use the following Fabric Manager procedure to troubleshoot FC-SP issues:
• Switches > Security > FC-SP
Use the following Fabric Manager procedure to troubleshoot port security issues:
• Fabricxx > VSANxx > Port Security
Use the following Fabric Manager procedure to troubleshoot fabric binding issues:
• Fabricxx > VSANxx > Fabric Binding
Common Troubleshooting Commands in the CLI
Us e the following CLI commands to troubleshoot FC-SP issues:
• show fcsp interface
• show fcsp internal event-history errors
• show fcsp dhchap
• show fcsp dhchap database
Us e the following CLI commands to troubleshoot port security issues:
• show port-security status
• show port-security database vsan
• show port-security database active vsan
• show port-security violations
• show port-security internal global
• show port-security internal info vsan
• show port-security internal state-history vsan
• show port-security internal commit-history vsan
• show port-security internal merge-history vsan
Us e the following CLI commands to troubleshoot fabric binding issues:
• show fabric-binding status
• show fabric-binding database vsan
• show fabric-binding database active vsan
• show fabric-binding violations
Checklist Check off
Verify that you have the ENTERPRISE_PKG or the MAINFRAME_PKG license installed
on all switches.
Verify that you have activated fabric binding.
Verify that all switches in the fabric have the same fabric binding database settings.
To Next Page
Loading...
Need help?
General