Cisco 9134 - MDS Multilayer Fabric Switch User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
11-21
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 11 Troubleshooting VSANs, Domains, and FSPF
Domain Issues
Using Fabric Reconfiguration for Domain ID Assignments with Fabric Manager
To use fabric reconfiguration to reassign domain IDs for a particular VSAN using Fabric Manager,
follow these steps:
Step 1 Choose Switches > Interfaces > FC Physical and select the Domain Manager tab in the Information
pane.
Step 2 Uncheck the RcfReject check box and click Apply Changes to disable RCF rejection.
Step 3 Choose Fabricxx > VSANxx > Domain Manager in the Logical Domain pane.
Step 4 Click the Configuration tab in the Information pane and set the Config Type drop-down menu to
preferred to remove any static domain ID assignments.
Step 5 Check the AutoReconfigure check box to enable the auto-reconfiguration option.
Step 6 Set the Restart drop-down menu to disruptive and click Apply Changes to restart the Domain Manager.
Using Fabric Reconfiguration for Domain ID Assignments with the CLI
To use fabric reconfiguration to reassign domain IDs for a particular VSAN using the CLI, follow these
steps:
Step 1 Use the show fcdomain domain-list command to determine if you have statically assigned domain IDs
on the switches.
Step 2 If you have statically assigned domain IDs, use the no fcdomain domain command to remove the static
assignments.
Step 3 Use the show fcdomain vsan command to determine if you have the RCF reject option enabled.
switch# show fcdomain vsan 1
The local switch is a Subordinated Switch
Local switch run time information:
State: Stable
Local switch WWN: 20:01:00:05:30:00:51:1f
Running fabric name: 10:00:00:60:69:22:32:91
Running priority: 128
Current domain ID: 0x64(100) ß verify domain id
Local switch configuration information:
State: Enabled
Auto-reconfiguration: Disabled
Contiguous-allocation: Disabled
Configured fabric name: 41:6e:64:69:61:6d:6f:21
Configured priority: 128
Configured domain ID: 0x64(100) (preferred)
Principal switch run time information:
Running priority: 2
Interface Role RCF-reject
---------------- ------------- ------------
fc2/1 Downstream Enabled
fc2/2 Downstream Disabled
fc2/7 Upstream Disabled
---------------- ------------- ------------

Cisco 9134 - MDS Multilayer Fabric Switch Specifications

General

Brand	Cisco
Model	9134 - MDS Multilayer Fabric Switch
Category	Switch
Language	English