Send documentation comments to mdsfeedback-doc@cisco.com
B-3
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Appendix B Troubleshooting Tools and Methodology
Using Cisco MDS 9000 Family Tools
Dec 10 23:40:26 flogi: fu_fsm_execute: ([1]21:00:00:e0:8b:08:96:22)
Dec 10 23:40:26 flogi: current state [FLOGI_ST_PERFORM_CONFIG]
Dec 10 23:40:26 flogi: current event [FLOGI_EV_RIB_RESPOSE]
Dec 10 23:40:26 flogi: next state [FLOGI_ST_PERFORM_CONFIG]
The following is a summary of some of the common debug commands available Cisco SAN-OS:
Table B-1 Debug Commands
Debug command Purpose
aaa Enables AAA debugging.
all Enables all debugging.
biosd Enables BIOS daemon debugging.
bootvar Enables bootvar debugging.
callhome Enables debugging for Call Home.
cdp Enables CDP debugging.
cfs Enables Cisco Fabric Services debugging.
cimserver Enables CIM server debugging.
core Enables core daemon debugging.
device-alias Enables device alias debugging.
dstats Enables delta statistics debugging.
ethport Enables port debugging.
exceptionlog Enables exception log debugging.
fc-tunnel Enables Fibre Channel tunnel debugging.
fc2 Enables FC2 debugging.
fc2d Enables FC2D debugging.
fcc Enables Fibre Channel congestion debugging.
fcdomain Enables fcdomain debugging.
fcfwd Enables fcfwd debugging.
fcns Enables Fibre Channel name server debugging.
fcs Enables Fabric Configuration Server debugging.
fdmi Enables FDMI debugging.
flogi Enables fabric login debugging.
fm Enables feature manager debugging.
fspf Enables FSPF debugging.
hardware Enables hardware, kernel loadable module parameter debugging.
idehsd Enables idehsd manager debugging.
ilc_helper Enables ilc-helper debugging.
ipacl Enables IP ACL debugging.
ipconf Enables IP configuration debugging.
ipfc Enables IPFC debugging.
klm Enables kernel loadable module parameter debugging.
To Next Page
Loading...
Need help?
General