Cisco 9134 - MDS Multilayer Fabric Switch - Page 60

Send documentation comments to mdsfeedback-doc@cisco.com
2-12
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 2 Troubleshooting Installs, Upgrades, and Reboots
Troubleshooting Cisco SAN-OS Software Upgrades and Downgrades
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:///m9500-sf1ek9-kickstart-mz
.2.1.1a.bin.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:///m9500-sf1ek9-kickstart-mz.2.
1.1a.bin.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive rolling
2 yes non-disruptive rolling
3 yes disruptive rolling Hitless upgrade is not supported
4 yes disruptive rolling Hitless upgrade is not supported
5 yes non-disruptive reset
6 yes non-disruptive reset
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------- -------------------- -------------------- ------------
1 slc 2.0(2b) 2.1(1a) yes
1 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
2 slc 2.0(2b) 2.1(1a) yes
2 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
3 ips 2.0(2b) 2.1(1a) yes
3 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
4 svclc 2.0(2b) 2.1(1a) yes
4 svcsb 1.3(5m) 1.3(5m) no
4 svcsb 1.3(5m) 1.3(5m) no
4 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
5 system 2.0(2b) 2.1(1a) yes
5 kickstart 2.0(2b) 2.1(1a) yes
5 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
5 loader 1.2(2) 1.2(2) no
6 system 2.0(2b) 2.1(1a) yes
6 kickstart 2.0(2b) 2.1(1a) yes
6 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
6 loader 1.2(2) 1.2(2) no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Syncing image bootflash:///m9500-sf1ek9-kickstart-mz.2.1.1a.bin to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:///m9500-sf1ek9-mz.2.1.1a.bin to standby.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 5: Waiting for module online.