Cisco Small Business RV220W Administration Guide

Cisco ProtectLink Web
Global Settings for Approved URLs and Clients
Cisco RV220W Administration Guide 100
5
STEP 1 In the Approved Clients section, check the Enable box to enable this feature.
STEP 2 In the Approved Clients Table, specify the clients that will always have access to
all URLs, regardless of Web Protection settings.
• To add an entry, click Add. On the Approved Client IP Configuration page,
enter IP addresses or ranges. To enter non-consecutive IP addresses, type
a semi-colon between entries, such as 1 0 .1.1.1; 1 0 .1.1. 5 . To enter a range of IP
addresses, type a hyphen between the first and last address in the range,
such as 1 0 .1.1. 0 -1 0 .1.1.1 0 . Click Save to save your settings.
• To edit an entry, check a box, and then click Edit. Enter and save the settings,
as described above.
• To delete an entry, check a box, and then click Delete. To select all entries in
the table, check the box in the heading row and then click Delete.
STEP 3 Click Save to save your settings, or click Cancel to reload the page with the
current settings.
Approved URLs
Use the Cisco ProtectLink Web > Global Settings > Approved URLs page to
specify approved URLs that the users are always able to access. Web Protection
will not restrict access to these domains.
To open this page: In the navigation tree, choose Cisco ProtectLink Web >
Global Settings > Approved Clients.
NOTE This page is available only if you activated your Cisco ProtectLink Web service. See
Getting Started with Cisco ProtectLink Web, page 98.
STEP 1 In the Approved URLs section, check the Enable box to enable this feature. The
specified URLs will always be accessible.
STEP 2 In the Approved URLs Table, specify the URLs that are always accessible,
regardless of Web Protection settings.
• To add an entry, click Add. On the Approved URL Configuration page. Enter
the trusted URL(s) in the box. To enter multiple URLs, type a semi-colon
between entries, such as www.cisco.com;www.google.com;
www.mycompany.com. All pages in the specified domains will be

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1