Cisco Small Business RV220W Administration Guide

Administering Your Cisco RV220W
Diagnostics
Cisco RV220W Administration Guide 174
9
• Incoming Traffic Volume—The volume of traffic, in megabytes, from the
WAN (Internet) to the LAN (Local Network).
• Average per day—The average volume of traffic, in megabytes, that passed
through this interface each day.
• % of Standard Limit—The percentage of the configured Monthly Limit that
has been consumed so far this month.
• % of this Month's Limit—The percentage of the effective limit that has been
consumed so far this month. (The effective limit applies if the Monthly Limit
was increased by using the Increase This Month’s Limit field.)
Diagnostics
Cisco provides tools to help you verify network connections and troubleshoot
issues.
• Network Tools, page 174
• Capture Packets, page 176
Network Tools
Use the Administration > Diagnostics > Network Tools page to use diagnostic
tools for troubleshooting.
To open this page: In the navigation tree, choose Administration > Diagnostics >
Network Tools.
To ping an IP address or domain:
Use the ping tool to check for connectivity between this router and another device.
STEP 1 In the Ping or Trace an IP Address section, enter these settings:
• Ping Through VPN Tunnel—Optionally, check this box to allow ping traffic
to pass through the VPN tunnel. Otherwise, uncheck the box.
• In the Ping or Trace section, enter the IP Address or Domain Name of the
device that you want to ping.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1