Configuring the Wireless Network
Basic Settings
Cisco RV220W Administration Guide 61
3
SSID Schedule for Network Availability
Use the SSID Schedule page to set a time period each day when the selected
wireless network is available for use.
To open this page: From the Wireless > Basic Settings page, select a network,
and then click Edit SSID Scheduling.
STEP 1 If needed, select a different network in the Select SSID list.
STEP 2 Enter these settings:
• Active Time—To enable a schedule, check the enable box. In this case, if a
network is enabled, it is available only between the specified Start Time
and Stop Time. To disable a schedule, uncheck the box. In this case, if a
network is enabled, it is always available.
• Start Time—Use the lists to specify the time when the network becomes
available each day.
• Stop Time—Use the lists to specify the time when the network becomes
unavailable each day.
STEP 3 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Wireless > Basic Settings page.
If you need to edit the settings for another network, select it in the SSID list, and
then repeat this procedure.
To Next Page
Loading...
Need help?
General
