Viewing the RV220W Status
Viewing the Wireless Statistics
Cisco RV220W Administration Guide 199
10
• Profile Name—This is the unique (alphanumeric) identifier of the wireless
profile attached to the Access Point.
• Security—This field displays the type of wireless security (if any) assigned
to this profile.
• Encryption—This field displays the encryption type that is assigned to the
profile: TKIP, AES, TKIP + AES.
• Authentication—This field displays the client authentication method that is
configured in the profile: PSK, RADIUS, PSK + RADIUS.
Viewing the Wireless Statistics
Use the Status > Wireless Statistics page to view the wireless statistics.
To open this page: In the navigation tree, choose Status > Wireless Statistics.
Click Refresh to obtain the latest information.
The Wireless Statistics window shows a cumulative total of relevant wireless
statistics for the radio and access points configured on the device. The counters
are reset when the device is rebooted.
Radio Statistics
A given radio can have multiple virtual access points configured and active
concurrently. This table indicates cumulative statistics for the available radio(s).
• Packets—The number of transmitted/received (Tx/Rx) wireless packets
reported to the radio, over all configured access points.
• Bytes—The number of Tx/Rx bytes of information reported to the radio,
over all configured access points.
• Errors—The number of Tx/Rx packet errors reported to the radio, over all
configured access points.
• Dropped—The number of Tx/Rx packets dropped by the radio, over all
configured access points.
• Multicast—The number of multicast packets sent over this radio.
• Collisions—The number of packet collisions reported to the access point.
To Next Page
Loading...
Need help?
General
