Viewing the RV220W Status
Viewing the System Summary
Cisco RV220W Administration Guide 198
10
Click Renew to release the current IP address and obtain a new one, or Release to
release the current IP address only.
WAN Information (IPv6)
Provides IPv6 WAN information.
• Connection Time—Displays the time duration for which the connection is
up.
• Connection Type—Indicates if the WAN IPv4 address is obtained
dynamically through a DHCP server, assigned statically by the user, or
obtained through a PPPoE/PPTP/L2TP ISP connection.
• Connection State—Indicates if the WAN port is connected to the Internet
Service Provider.
• IP Address—IP address of the WAN port.
• Gateway—Gateway IP address of the WAN port.
• DNS Server—DNS server IP address of the WAN port.
Wireless Information
This section displays information about the Wireless Radio settings.
• Country—Displays the country for which the radio is configured.
• Operating Frequency—Displays the operational frequency band.
• Wireless Network Mode—Displays the Wi-Fi mode of the radio (for
example, N or N/G,).
• Channel—Displays the current channel in use by the radio.
Click Refresh to refresh the wireless information.
Available Access Points Table
The table displays the list of Access Points currently enabled in the device. The
table also displays information related to the Access Point, such as Security and
Encryption methods used by the Access Point.
• SSID—This is the Service Set Identifier (SSID) that clients use to connect to
the access point that has this profile. It is referenced in the access point
tables and statistics.
• BSSID—The 48 bit unique identifier of the Basic Service Set (BSS) to which
the Access Point belongs.
To Next Page
Loading...
Need help?
General
