Configuring Networking
IPv6
Cisco RV220W Administration Guide 48
2
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings.
RADVD Advertisement Prefixes
If you enabled RADVD (Router Advertisement Daemon), you can add RADVD
advertisement prefixes to support address auto-configuration by new hosts that
connect to your network.
• Managing Advertisement Prefixes, page 48
• Adding and Editing Advertisement Prefixes, page 49
Managing Advertisement Prefixes
Use the Networking > IPv6 > Advertisement Prefixes page to view, add, edit, or
delete RADVD advertisement prefixes.
To open this page: In the navigation tree, choose Networking > IPv6 >
Advertisement Prefixes.
Perform these tasks:
• To add an entry, click Add. Then enter the settings on the Add/Edit
Advertisement Configuration page. See Adding and Editing
Advertisement Prefixes, page 49.
• To edit an entry, check the box and then click Edit. Then enter the settings on
the Add/Edit Advertisement Configuration page. See Adding and Editing
Advertisement Prefixes, page 49.
• To delete an entry, check the box and then click Delete. When the
confirmation message appears, click OK to continue with the deletion, or
otherwise click Cancel.