Configuring Security
Using SSL Certificates for Authentication
Cisco RV220W Administration Guide 145
7
• Email Address—(Optional) Enter the e-mail address of the company
contact that is used when generating the self certificate request.
STEP 2 Click Save to save your settings, or click Cancel to redisplay the page with the
current settings.
STEP 3 After clicking Save, click OK to generate the certificate, or otherwise click Cancel.
A new certificate request is added to the Self Certificate Requests table on the
Security > SSL Certificate page.
Viewing a Certificate Request
Use the Certificate Request Data page to view the content of the generated
certificate request.
To open this page: From the Security > SSL Certificate page, Self Certificate
Requests table, click View.
STEP 1 Select the text with your mouse.
STEP 2 Right-click in the highlighted text, and then click Copy on the shortcut menu.
STEP 3 Paste the copied text into a text file, and then save the file with a .pem extension.
STEP 4 Send the text file to the CA for signing.
To Next Page
Loading...
