Cisco Small Business RV220W Administration Guide

Configuring Quality of Service
CoS Settings
Cisco RV220W Administration Guide 153
8
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings.
CoS Settings
802.1p defines eight different Classes of Service (CoS). You can map these
services to traffic forwarding queues and to DCSP values.
• CoS Settings for Traffic Forwarding Queues, page 153
• CoS to DSCP Remarking, page 154
CoS Settings for Traffic Forwarding Queues
Use the QoS > CoS Settings > CoS Settings page to map CoS priorities to traffic
forwarding queues.
To open this page: In the navigation tree, choose QoS > CoS Settings > CoS
Settings.
STEP 1 To e n a b l e CoS to Queue settings, check the Enable box. Otherwise, uncheck the
box. The CoS to Traffic Forwarding Queue Mapping Table is available only when
CoS to Queue is enabled.
STEP 2 In the CoS to Traffic Forwarding Queue Mapping Table, choose a Traffic
Forwarding Queue for each CoS Priority.
STEP 3 Click Save to save your settings, or click Cancel to reload the page with the
current settings. To reload the default settings, click Restore Default.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1