Cisco Small Business RV220W Administration Guide

Administering Your Cisco RV220W
Password Rules for Password Complexity
Cisco RV220W Administration Guide 156
9
Password Rules for Password Complexity
Use the Administration > Password Rules page to enable the Cisco RV220W to
enforce complexity requirements for passwords.
To open this page: In the navigation tree, choose Administration > Password
Rules.
STEP 1 To enable Password Rules Enforcement, check the Enable box. Uncheck the box
to disable this feature. When this feature is enabled, new passwords must meet
the requirements that you specify on this page.
STEP 2 In the Individual Rule Settings section, enter these settings:
• Minimal Password Length—Enter the minimum number of characters for a
valid password. You can enter a number from 5 to 64. This setting is required
when Password Rules Enforcement is enabled.
• Minimum Number of Character Classes—Enter the minimum number of
character classes for a valid password. You can enter 3 or 4. This setting is
required when Password Rules Enforcement is enabled. The possible
classes are listed below.
- Uppercase letters
- Lowercase letters
- Numbers
- Special characters available on a standard keyboard.
• The new password must be different than the current one—Check the
Enable box to require a new password to be different from the current
password. Uncheck the box to disable this requirement.
STEP 3 Click Save to save your settings, or click Cancel to reload the page with the
current settings.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1