Cisco Small Business RV220W Administration Guide

Configuring Virtual Private Networks (VPNs) and Security
SSL VPN Tunnel Client Configuration
Cisco RV220W Administration Guide 139
6
Configuring a Client Route
Use the SSL VPN Client Route Configuration page to enter the IP address and
subnet mask for the client route.
To open this page: From the VPN > SSL VPN Client > Configured Client Routes
page, click Add or select a route and then click Edit.
STEP 1 Enter this information:
• Destination Network—Enter the destination subnet to which a route is
added on the SSL VPN Client.
• Subnet Mask—Enter the subnet mask for the destination network.
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the VPN > SSL VPN Client > Configured
Client Routes page.
Viewing the SSL VPN Client Portal
To view the SSL VPN Client Portal, click VPN> SSL VPN Client > SSL VPN Client
Portal in the navigation tree.
NOTE Remote users will use the Portal URL to access the VPN portal.
The client portal provides remote access to the corporate network through the
following options in the navigation pane:
• VPN Tunnel—After the user clicks the link in the navigation pane, the VPN
Tunnel information window opens. The user can click the Launcher icon to
connect to the remote network.
• Port Forwarding—After the user clicks the link in the navigation pane, the
Port Forwarding information window opens. The user can click the
Launcher icon to connect to the remote servers.
• Change Password—The user can click this link to change his or her
password.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1