2
Cisco RV220W Administration Guide 16
Configuring Networking
The Networking menu provides access to configuration pages where you can
configure your WAN, LAN, and other IPv4 and IPv6 network settings.
Refer to these topics:
• WAN Settings for IPv4, page 16
• LAN Configuration for IPv4, page 22
• Routing, page 31
• Port Management, page 37
• Dynamic DNS, page 38
• IPv6, page 39
WAN Settings for IPv4
Use the Networking > WAN menu to set up your Internet connection for your IPv4
network.
• Configuring the IPv4 WAN Settings, page 17
• PPPoE Profiles for Point-to-Point Protocol over Ethernet Connections,
page 20
NOTE For instructions on configuring your RV220W for an IPv6 network, see the “IPv6”
section on page 39.
To Next Page
Loading...
