Cisco Small Business RV220W Administration Guide

Configuring Virtual Private Networks (VPNs) and Security
SSL VPN Server
Cisco RV220W Administration Guide 134
6
• To edit a resource, check the box and then click Edit. Then enter the
settings on the Port Forwarding Host Configuration page. See
Configuring Host Name Resolution for Port Forwarding, page 135.
• To delete a resource, check the box and then click Delete. To select all
resources, check the box in the heading row, and then click Delete. When
the confirmation message appears, click OK to continue with the deletion,
or otherwise click Cancel.
Configuring a TCP Application for SSL VPN Port Forwarding
Use the Port Fowarding Application Configuration page to add or edit a port
forwarding application.
To open this page: From the VPN > SSL VPN Server > Port Forwarding page,
click Add or select an entry in the Configured Applications for Port Forwarding
Tab le and click Edit.
STEP 1 Click VPN > SSL VPN Server > Port Forwarding.
The following table lists some common applications and corresponding TCP port
numbers:
TCP Application Port Number
FTP Data (usually not needed) 20
FTP Control Protocol 21
SMTP (send mail) 25
HTTP (web) 80
POP3 (receive mail) 110
NTP (network time protocol) 123
Citrix 1494
Termin al Service s 3389
VNC (virtual network computing) 5900 or 5800

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1