Administering Your Cisco RV220W
Network Management (SNMP)
Cisco RV220W Administration Guide 170
9
• To edit an entry, check the box and then click Edit. Then enter the settings on
the Add / Edit Trap Configuration page. See Configuring SNMP Traps,
page 171.
• To delete an entry, check the box and then click Delete. To select all entries,
check the box in the heading row, and then click Delete. Click Save to
continue with the deletion, or otherwise click Cancel.
Configuring the User Security Settings for SNMP
Use the Add / Edit SNMPv3 User Configuration page to configure the SNMPv3
security settings for the default Administrator and Guest users.
To open this page: From the Administration > Network Management > SNMP
page, select a user and then click Edit.
The Username and Access Privilege cannot be changed.
STEP 1 In the Security Level field, choose the appropriate settings for your SNMP
manager.
• NoAuthNoPriv—Doesn't require any Authentication and Privacy.
• AuthNoPriv—Submit only the Authentication Algorithm and Password.
• AuthPriv—Submit Authentication Algorithm, Authentication Password,
Privacy Algorithm, and Privacy Password.
STEP 2 Based on the selected Security Level, complete all available fields:
• Authentication Algorithm—Choose an authentication algorithm from the
drop down list - MD5 and SHA
• Authentication Password—Enter the authentication password for the user.
• Privacy Algorithm—Choose a privacy algorithm from the drop down list -
DES or AES
• Privacy Password—Enter the privacy password for the user.
STEP 3 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Administration > Network
Management > SNMP page.
To Next Page
Loading...
Need help?
General
