Cisco Small Business RV220W Administration Guide

Configuring Virtual Private Networks (VPNs) and Security
SSL VPN Server
Cisco RV220W Administration Guide 135
6
STEP 1 Enter this information:
• Local Server IP Address—Enter the IP address of the internal host machine
or local server.
• TCP Port Number—Enter the port number of the TCP application that
enables port forwarding.
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the VPN > SSL VPN Server > Port
Forwarding page.
Configuring Host Name Resolution for Port Forwarding
Use the Port Forwarding Host Configuration page to configure a hostname
(FQDN) for the network server to give users an easy way to connect to the server
without having to remember and enter an IP address.
NOTE The local server IP address of the configured hostname must match the IP address
of the configured application for port forwarding.
To open this page: From the VPN > SSL VPN Server > Port Forwarding page,
click Add or select an entry in the Configured Host Names for Port Forwarding
Tab le and click Edit.
STEP 1 Enter this information:
• Local Server IP Address—Enter the IP address of the internal host machine
or local server.
• Fully Qualified Domain Name—Enter the fully qualified domain name for
the TCP application.
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the VPN > SSL VPN Server > Port
Forwarding page.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1