Cisco Small Business RV220W Administration Guide

Firewall
Advanced Firewall Settings
Cisco RV220W Administration Guide 90
4
Adding or Editing a Schedule
Use the Add/Edit Schedules Configuration page to configure a schedule for a
firewall access rule or a port forwarding rule.
To open this page: From the Firewall > Advanced Settings > Schedules page,
click Add or select a schedule and then click Edit.
STEP 1 Enter these settings:
• Name—Enter a unique name to identify the schedule in the Schedule Table
on the Firewall > Advanced Settings > Schedules page.
• Time—Choose one of the following options:
- If this schedule applies to the entire day, check the All Day box.
- If this schedule applies during specified hours of the day, uncheck the All
Day box. Then enter the Start Time and End Time by choosing the
Hours, Minutes, and time period (AM or PM). The schedule will become
active at the specified start time and will become inactive at the
specified end time on the selected day(s).
• Repeat—Choose one of the following options:
- If this schedule applies to all the days of the week, check the Everyday
box.
- If this schedule applies only on specified days, uncheck the Everyday
box. Then check the box for each day when the schedule is active.
Uncheck the box for each day when the schedule is inactive.
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Firewall > Advanced Settings >
Schedules page.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1