Cisco Small Business RV220W Administration Guide

Configuring Virtual Private Networks (VPNs) and Security
SSL VPN Server
Cisco RV220W Administration Guide 129
6
SSL VPN Policies
SSL VPN Policies give configured SSL users access to services and network
resources. A policy applies to a specific network resource, IP address, or IP
address range on the LAN, or to other SSL VPN services that are supported by the
Cisco RV220W.
• About SSL VPN Policies, page 129
• Managing SSL VPN Policies, page 129
• Configuring an SSL VPN Policy, page 130
About SSL VPN Policies
By default, a global PERMIT policy (not displayed) is preconfigured over all
addresses and over all services and ports.
You can create user, group, and global policies. Policies are applied based on the
following levels of precedence:
• User-level policies take precedence over Group-level policies.
• Group-level policies take precedence over Global policies.
• When two policies are in conflict, a more specific policy takes precedence
over a general policy. For example, a policy for a specific IP address takes
precedence over a policy for a range of addresses that includes this IP
address.
A policy can be offered to the VPN Tunnel, Port Forwarding, or both.
After you define a policy, it goes into effect immediately.
Managing SSL VPN Policies
Use the VPN > SSL VPN Server > SSL VPN Policies page to view, add, edit, or
delete SSL VPN policies.
To open this page: In the navigation tree, choose VPN > SSL VPN Server > SSL
VPN Policies.
The SSL VPN Policies Table displays all existing SSL VPN policies. You can
create queries to find particular policies.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1