Cisco Small Business RV220W Administration Guide

Firewall
Advanced Firewall Settings
Cisco RV220W Administration Guide 88
4
Adding or Editing a Custom Service
Use the Add/Edit Custom Services Configuration page to enter the settings for a
custom service.
To open this page: From the Firewall > Advanced Settings > Custom Services
page, click Add or select a service and then click Edit.
STEP 1 Enter these settings:
• Name—Enter a service name for identification and management purposes.
• Type—Choose layer 4 protocol that the service uses (TCP, UDP, ICMP,
ICMPv6, or other).
- If you chose ICMP or ICMPv6 as the service type, specify the ICMP type
by entering its numeric value (from 0 through 40 for ICMP and from 0
through 255 for ICMPv6).
- If you chose TCP or UDP, enter the first TCP or UDP port of the range that
the service uses. In the Finish Port field, enter the last TCP or UDP port
of the range that the service uses.
- If you chose Other, enter the number of the protocol in the Protocol
Number field. (For example, if you are using RDP, enter 27 in the protocol
number field.)
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Firewall > Advanced Settings >
Custom Services page.

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1