Viewing the RV220W Status
Viewing Open Ports
Cisco RV220W Administration Guide 206
10
Viewing Open Ports
The View Open Ports page displays a listing of all open ports.
To view open ports, choose Status > View Open Ports.
This page displays this information about open ports:
Viewing Active Users
To view the list of active users who are currently logged in to the system, choose
Status > Active Users. Click Refresh to obtain the latest information.
The Active Users window displays this information:
• Username—Name of the user.
• Group—Group to which the user belongs.
• IP Address—IP address of the host from which the user accessed the
RV220W.
Proto The protocol (TCP, UDP, and raw) used by the port.
Recv-Q The number of received bytes in the waiting-for-
delivery queue. These bytes have been read from
the input stream but are not yet copied by the
program using this port.
Send-Q The number of bytes in the waiting-to-send queue.
These bytes are buffered but not yet successfully
transmitted to the receiving host.
Local Address The address and port number of the local end of
this socket.
Foreign Address The address and port number of the remote end of
this socket.
State The state of the port.
PID/Program Name The process ID (PID) and name of the program
using the port (for example, 1654/thttpd, where
1654 is the PID and thttpd is the program’s name).
To Next Page
Loading...
Need help?
General
