Administering Your Cisco RV220W
User Management
Cisco RV220W Administration Guide 168
9
Configuring an IP Address Login Policy
Use the Defined Address Configuration page to enter an address that is subject
to a login policy.
STEP 1 Enter these settings:
• Source Address Type—Choose the type of address.
• Network Address/IP Address—Enter the address.
• Mask Length—Enter the number of masked bits, as in CIDR slash notation.
Valid values are from 0 to 32.
STEP 2 Click Save to save your settings, or click Cancel to reload the page with the
current settings. Click Back to return to the Administration > User Management >
Users page.
To Next Page
Loading...
