HelixNet | User Guide
1. In Menu mode, select Diagnostics and then Powerlines.
2. From the third menu, select one of the following:
l Powerline 1 (refers to Line 1)
l Powerline 2 (refers to Line 2)
3. The fourth menu displays the status and other measures / information for the powerline. The
status of the powerline is either OK [operating normally], Busy or Error.
For more details of the information displayed, see (link...)
Note: Powerline status is also indicated by the powerline LEDS on the front panel.
Green LED = OK
Amber LED = Busy
Red LED = Error
For more information about powerline diagnostics, see Troubleshooting.
5.8.4 Viewing Keysets Information
To view information about the keysets:
1. In Menu mode, select Diagnostics and then Keysets.
2. From the third menu (third display screen), select a keyset from 1 to 4.
3. The fourth menu (fourth display screen) displays the following status information:
l Name – The Channel name
l Talkers – The number of talkers on the Partyline
l Main Stations – The number of Main Stations listening
l Beltpacks – The number of beltpacks listening on the Partyline
l Remote – The number of Remote Stations listening
l Speaker – The number of Speaker Stations listening
l 2-Wire – The number of 2-wire ports listening
l 4-Wire – The number of 4-wire ports listening
Page 103
To Next Page
Loading...
