HelixNet | User Guide
3. To edit the label for this input:
a. From the third menu, select Label.
b. From the fourth menu, select the existing label by scrolling to it and pushing the rotary
controller. Edit the label by rotating the controller to scroll through letters and digits and
pushing to select a letter/digit.
c. When you have done, scroll to Save and push the rotary controller. To exit without saving
changes, go back to the third screen.
3. To select the gain:
a. From the third menu, select Gain.
b. From the fourth menu, select one of the following:
n + 12dB
n + 6dB
n 0dB (default)
n - 6dB
n - 12dB
c. To confirm the selected setting, press the rotary control.
4. To select the IFB dim level:
a. From the third menu, select IFB Dim Level.
Note: The IFB Dim Level determines the volume level the Program Level is reduced
to when it is interrupted by the IFB.
b. From the fourth menu, select one of the following:
l IFB Disabled (default)
l - 6dB
l -12dB
l -18dB
l -24dB
l Full Cut
c. To confirm the selected setting, press the rotary control.
Page 105
To Next Page
Loading...
