HelixNet | User Guide
Note: Default Link-Group Role for an HMS is Disabled.
Note: The host device is the device your browser is currently pointing to.
3. To access the LQ CCM, enter the IP address of the LQ device, as displayed on the front panel,
into the address field of your browser. If the unit is reachable over your network, this will take
you to the Overview page of the CCM that is served by the unit.
4. Set Link-Group Role of LQ unit to Link-Member. Navigate to Device/Linking/Link-Group
Role.
5. Enter the Link-Master IP address.
6. For each device to be added to the Link-Group, input the device IP into the browser’s address
field to access the CCM, designate the device as Link-Member and give it the Link-Master IP
address (this links the device to the group).
Note: Once you have linked the members to the master, all devices in the Link-Group
will be visible in the Overview page of the CCM.
Page 210
To Next Page
Loading...
