HelixNet | User Guide
4. To confirm the selected setting, press the rotary control.
5.4.1 Editing the Channel label
The maximum length for a Channel label is 12 characters. To edit the Channel label:
Note: Channel labels will be dictated by the Link Master when Main Stations are linked.
1. In Menu mode, select Channels and then the name of the Channel you want to edit.
2. From the third menu, select Label.
3. Select Clear and press the rotary control to clear the Channel label.
4. In the fourth menu, the following prompt is displayed above the Channel label:
[Press to edit]
Press the rotary control.
5. The first letter of the Channel label is shown as selected. The following prompt is displayed
above the Channel label:
[Scroll / Press to Select]
Scroll to the character you want to edit by turning the rotary control. To begin editing,
press the rotary control.
6. The character you have selected for editing is shown in a box with a dotted border.
To display alternative characters in the box, turn the rotary control. The range of
available characters comprises the following:
Characters Description / range
Numbers (numeric) 0 to 9
Letters
Capital letters = A to Z
Small letters = a to z
Symbols
# & * ( ) - _ = + / ! @ :
Note: You can also select a space.
To select a character, press the rotary control.
7. When you have selected a replacement character, scroll to the next character you want to
edit. When you have finished editing the Channel label, scroll to Save (displayed beneath the
Channel label).
Page 81
To Next Page
Loading...
