HelixNet | User Guide
4. To confirm the selected setting, press the rotary control.
5.3.6 Setting Key Brightness
By default, the front panel keys are set to High / Low. To set the brightness of
all front panel keys:
1. In Menu mode, select Station Settings and then Display.
2. From the third menu, select Key Brightness.
3. From the fourth menu, select one of the following brightness settings:
Key(s) Description
High / Low
The default setting.
Keys are lit bright when active and lit dim when inactive.
High / Off Keys are lit bright when active and are unlit when inactive.
Low / Off Keys are lit dim when active and are unlit when inactive.
Off / Off Keys are unlit, whether or not they are active or inactive.
4. To confirm the selected setting, press the rotary control.
5.3.7 Setting the Screensaver
The screensaver features the Channel label and is enabled by default. The display screens enter
screensaver mode when the Main Station has been inactive for 10 minutes.
Tip: To exit screensaver mode, press any key on the front.
To enable or disable the screensaver:
1. In Menu mode, select Station Settings and then Display.
2. From the third menu, select Screensaver.
3. From the fourth menu, select:
l Channel Name (default)
l Hostname
l Role Name
l Blank
l Disabled
Page 80
To Next Page
Loading...
