HelixNet | User Guide
Channels to talk to the Channels visible on your four device Keyset screens.
1. In menu mode select Station Settings and then Keysets.
2. From the third menu, select All Talk.
3. From the fourth menu, select All Channels or Visible Channels.
4. To confirm the selected setting, press the rotary control.
5.3.4 Setting the RMK (Remote Mic Kill) Key
The RMK (Remote Mic Kill) key is used to:
Deselect any latched keyset Talk routes.
Turn off any latched Talk on connected analog Partyline equipment.
To enable or disable the RMK (Remote Mic Kill) key:
1. In Menu mode, select Station Settings and then Keysets.
2. From the third menu, select RMK.
Note: Talk Latch and the SA Output Key are also listed in this menu. See link...
3. From the fourth menu, select either of the following:
l All Channels (12 or 24 according to license)
l Visible Channels (default)
l Disabled
4. To confirm the selected setting, press the rotary control.
5.3.5 Setting Display Screen Brightness
By default, the display screens are set for medium brightness. To set the
brightness of the display screens:
1. In Menu mode, select Station Settings and then Display.
2. From the third menu, select OLED Brightness.
3. From the fourth menu, select one of the following brightness settings:
l High
l Medium (default)
l Low
Page 79
To Next Page
Loading...
