HelixNet | User Guide
n …
c. To confirm the selected setting, press the rotary control.
4. The Program Output allows a program feed associated with the Channel assigned to the four
wire port to either be delivered to that 4 wire port alongside the other Channel audio or not. To
set the Program Output:
a. From the third menu, select Program Output.
b. From the fourth menu, select one of the following:
n Unmute
n Mute (default)
5. To confirm the selected setting, press the rotary control.
6. To set the input level for the four-wire port:
a. From the third menu (third display screen), select Input Gain.
b. From the fourth menu (fourth display screen), select one of the following:
n +12dB
n + 6dB.
n 0dB (default)
n -6dB.
n -12dB
c. To confirm the selected setting, press the rotary control.
7. To set the output level for the four-wire port:
a. From the third menu, select Output Gain.
b. From the fourth menu, select one of the following:
n +12dB
n + 6dB.
n 0dB (default)
n -6dB.
n -12dB
Page 86
To Next Page
Loading...
