Horizon Imager User’s Manual 6-7
Printing via PostScript
Crop Margin True, False Eliminates white margin around region of interest.
Advanced feature. Refer to the Horizon Imager Technical
Manual for more information.
Margin Size 0 to 50 (pixels), in
increments of 5
Works with Crop Margin to create small border around
region of interest.
Advanced feature. Refer to the Horizon Imager Technical
Manual for more information.
Print FMF After Job True, False Not currently implemented. Always select Use Printer
Default.
Skip Blank Pages True, False Prevents printing of a sheet or cell if blank.
Gamma 0.1 to 6.0 Affects image brightness.
Contrast -100 to 100 Affects image contrast.
Polarity Positive or Negative Can be used to reverse image polarity.
Background White/Clear, Light,
Medium, Dark, Black
Sets color of any part of sheet or cell not covered by an
image.
Scaling Method Box, Bilinear, Mitchell,
Bicubic, Lanczos,
Sharp1, Sharp2, Sharp3
Specifies the filter to use if the image is being scaled
(scaling can be specified in the Sheet Layout parameter in
Set 1).
Saturation -100 to 100, in increments
of 5
A property of color that specifies how far a color is from a
gray tone of the same density.
Negative values reduce saturation; positive values
increase saturation.
-100 = no color; 0 = no adjustment; 100 = full color.
MCM 0 to 17, plus other custom
values
Medical Color Matching. For values 1 through 17,
algorithms are applied to the image data before printing so
that printed images match those displayed on a monitor.
For a list of which monitors correspond to the available
MCM values, refer to Appendix D.
Dmax 100 to 400, in increments
of 10
Maximum image density value.
Dmin 0 to 100, in increments of
10
Minimum image density value.
Table 6-1. Horizon Imager Windows PostScript Parameters (cont.)
Parameters Settings Description
To Next Page
Loading...
