Horizon Imager User’s Manual 3-17
Basic Imager Operations
and
keys
With menu options displayed:
• The key chooses the currently selected menu
option.
• The key goes back to the previous menu.
When entering data, these keys move the change brackets
left and right to selected character locations. When
arrowing past a selection at the end of a line, the change
brackets wrap to the selection at the other end of the line.
key
• Chooses the currently selected menu option (same as
pressing the key).
• Saves any current changes you have made to a setting.
• Answers “Yes” to a message prompt.
key
• Redisplays previous menu (same as pressing the
key).
• Discards any current changes you have made to a
setting, and redisplays the previous menu.
• Answers “No” to a message prompt.
key
Pauses or resumes printing. While paused, the imager will
still receive and process jobs, but will not print them.
After pressing the key to pause the imager, the
imager will go back online after a site-configurable time-out
if there is no other user activity at the control panel and the
imager is not in a Fault state.
When the imager is paused but normal operation can be
resumed, the
key flashes.
key
Displays context-sensitive help, based on state of the
imager and the control panel display.
Table 3-4. Control Panel Keys
Key Description
ENTER
CANCEL
PAUSE
PAUSE
PAUSE
HELP
To Next Page
Loading...
