·
Hidden sets the “hidden” attribute for a file. When this attribute is set, the file cannot be accessed by
any command except LOAD. Access is restricted by password. This file is not displayed in the Ram
Disk.
Options: /Reset clears the hidden attribute.
Syntax: FUAH <file_name>
FUAH/R <file_name>
·
Readonly sets the “readonly” attribute for a file. When this attribute is set, the file cannot be modified or
deleted and access is restricted by password.
Options: /Reset clears the readonly attribute.
Syntax: FUAR <file_name>
FUAR/R <file_name>
·
System sets the system attribute for a file. When this attribute is set, the file cannot be deleted. Access
is restricted by password.
Options: /Reset clears the system attribute.
Syntax: FUAS <file_name>
FUAS/R <file_name>
·
Backup copies files from the default device to the default backup device. Both default devices are ele
-
ments in the predefined variable $DFT_DV and can be set using PDL2 assignment instructions. Where
necessary, the Kermit protocol is installed automatically.
If no file is specified, all the files are copied.
Syntax: FUB <file_name>
· Compress recovers files from a compressed archive file and allows them to be viewed.
Extract View
Attribute Backup Compress
FD_format Install Restore Search Verify
·
Extract extracts files from a compressed archive file. Both system and memory protection must be off to
use this command. The files extracted from the archive will have the same attributes as the source file
used to create the archive file.
Syntax: FUCE <archive_name> <file_name>
·
View lists the files that are compressed in an archive. Both system and memory protection must be off
to use this command.
Syntax: FUCV <archive_name> <file_name>
·
FD_format is used to format a diskette in the floppy disk drive. Both system and memory protection
must be off to use this command.
High Low
Attribute Backup Compress FD_format
Install Restore Search Verify
·
High causes a high density format of the disk (1440 Kbytes).
Syntax: FUFH
·
Low causes a low density format of the disk (720 Kbytes).
Syntax: FUFL
OPERATOR INTERFACE C3G Plus
3-36 08/0702
FILER COMMAND
To Next Page
Loading...