CRITICALPOINT 700/800MHZ BDA/DAS/BBU V3 USER MANUAL
©2024 Comba Telecom. All Rights Reserved.
568 Gibraltar Drive, Milpitas, CA 95035 | +1 408 526 0180
Rev. 1-0-2 Rev. Date: 11-1-2024
Table 33 contains a complete list of all internal device alarms. Each of these individual alarms can be
configured to trigger one of the 8 Dry Contact outputs. By default, the V3 BDA/MU/RU devices will use the
NFPA 1221 2019 alarm configuration, and the internal alarms are already configured for that standard. The
user can choose one of the standard presets, or they can use a custom user defined configuration and
configure which internal system alarms are mapped to each Dry Contact Output relay.
Table 33: V3 BDA/MU/RU - Complete List of Device Alarms
Related Bands / Modules / Devices
DL 700MHz, DL 800MHz, UL
700/800MHz
DL 700MHz, DL 800MHz, UL
700/800MHz
DL 700MHz, DL 800MHz, UL
700/800MHz
Oscillation Shutdown Alarm
700MHz, 800MHz, hidden when the
feature is OFF
Oscillation Gain Reduction Alarm
700MHz, 800MHz, hidden when the
feature is OFF
DT ANT Disconnection Alarm
Device / Preconfigured as Door
Open Alarm
BBU, hidden when not using BBU V3
BBU, hidden when not using BBU V3
BBU, hidden when not using BBU V3
Battery Over-Discharge Alarm
BBU, hidden when not using BBU V3
Battery Over Temperature Alarm
BBU, hidden when not using BBU V3
Battery Connection Fail Alarm
BBU, hidden when not using BBU V3
Battery Comm. Fault Alarm
BBU, hidden when not using BBU V3
Charger Comm. Fault Alarm
BBU, hidden when not using BBU V3
To Next Page
Loading...