DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
172
hexadecimal value will automatically be entered.
Ethernet Type Mask
Enter the Ethernet type mask hexadecimal value here. This value must
be between 0x0 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
CoS Select the CoS value used here. This value is between 0 and 7.
VID
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Time Range
Enter the name of the time range to associate with this ACL rule.
Action
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Click the Back button to return to the previous window.
Click the Next button to continue.
After clicking the IPv4 radio button and the Next button, the following window will appear.
Figure 8-5 ACL Configuration Wizard (Add Rule for IPv4 ACL) window
This window has a dynamic section. Every selection made in the Protocol Type drop-down list will
change the bottom part of this window.
The fixed fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and
65535. Select Auto Assign to automatically generate an ACL rule
number for this entry.
Protocol Type Select the protocol type option here. Options to choose from are TCP,
UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP,
PCP, Protocol ID, and None.
After selecting the TCP option as the Protocol Type, the following section will appear.
To Next Page
Loading...
