DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
228
Figure 8-61 Standard IPv6 ACL (Edit ACL) window
The fields that can be configured are described below:
Parameter Description
Start Sequence No.
Enter the start sequence number here.
Step
Enter the sequence number increment here.
Counter State
Select to enable or disable the counter state option here.
Remark
Enter an optional remark that will be associated with this profile here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
To view the list of rules, that are associated with an ACL profile, select the ACL profile (found in the ACL
profile table). The rule of ACL rules, connected to the selected ACL profile, will be displayed in the ACL
rule table, as shown below:
Figure 8-62 Standard IPv6 ACL (Rule Display) window
Click the Delete button to remove the specific ACL rule.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
