DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
242
Click the Delete button to remove the specific ACL profile.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To add an ACL rule in the ACL profile, select it (the ACL profile will toggle to the bold font), and click the
Add Rule button.
Figure 8-79 Extended MAC ACL (Selected) window
After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in
the selected ACL profile, as shown below:
Figure 8-80 Extended MAC ACL (Add Rule) window
The fields that can be configured are described below:
Parameter Description
Rule Number
Enter the ACL rule number here. This value must be between 1 and
65535. If this value is not specified, the system will automatically
To Next Page
Loading...
