DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
243
generate an ACL rule number for this entry.
Action
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Source
Select and enter the source information here. Options to choose from
are Any, Host, and MAC. When the Any option is selected, any
source traffic will be evaluated according to the conditions of this rule.
When the Host option is selected, enter the source host’s MAC
address here. When the MAC option is selected, the Wildcard option
will also be available. Enter the source MAC address and wildcard
value in the spaces provided.
Destination
Select and enter the destination information here. Options to choose
from are Any, Host, and MAC. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host’s
MAC address here. When the MAC option is selected, the Wildcard
option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.
Specify Ethernet Type Select the Ethernet type option here. Options to choose from are aarp,
appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-
console, mop-dump, vines-echo, vines-ip, xns-idp, and arp.
Ethernet Type
Enter the Ethernet type hexadecimal value here. This value must be
between 0x600 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
Ethernet Type Mask
Enter the Ethernet type mask hexadecimal value here. This value must
be between 0x0 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
CoS Select the CoS value used here. This value is between 0 and 7.
Inner CoS Select the inner CoS value used here. This value is between 0 and 7.
VID
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Time Range
Enter the name of the time range to associate with this ACL rule.
Click the Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
To enable the Counter State option or to enter a Remark for the profile, click the Edit button, next to the
specific ACL profile (found in the ACL profile table).
To Next Page
Loading...
