Dell Force10 MXL Blade - Page 109

Bare Metal Provisioning (BMP) | 107
2. The system sends DHCP Discover on all the interface up ports.
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Ma 0/0.
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/0.
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/5.
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/6.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/8.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/35.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Fo 0/56.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Fo 0/60.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Ma 0/0.
3. The IP address, boot image filename, and configuration filename are reserved for the system and
provided in the DHCP reply (one-file read method). The system receives its IP address, subnet mask,
DHCP server IP, TFTP server address, DNS server IP, boot file name, and the configuration filename
from the DHCP server.
If a DHCP offer has no image path or configuration file path, it is considered to be an invalid BMP
DHCP offer and the offer is ignored. The first DHCP offer with IP address, FTOS image and configu-
ration file, or the IP address and FTOS image, or the IP address and configuration file is chosen.
4. The DHCP OFFER is selected.
***** DHCP OFFER DETAILS *****
DHCP acquired IP = 30.0.0.20
subnet-mask = 255.255.0.0
DHCP provided Image file = jumpstart
DHCP provided Config file = pt-dt-m1000e-3-a2-12
DHCP Server IP = 30.0.0.1
TFTP IP = 30.0.0.1
DNS IP = 30.0.0.1
Routers = 30.0.0.14
**********************************
The details are displayed in the syslog messages:
00:01:21: %STKUNIT0-M:CP %JUM00:01:21: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP acquired IP
10.16.134.57 mask 255.255.0.0 server IP 10.16.134.207.
PSTART-5-BOOT_OFFER: DHCP tftp IP NIL dns IP NIL router IP 30.1.1.1.
00:01:21: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP image file tftp://10.16.134.207/jumpstart.
00:01:21: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP config file tftp://10.16.134.207/
pt-dt-m1000e-3-a2-12.
5. The system sends a unicast message to the server to retrieve the named configuration file and/or boot
file from the base directory of the server.
a The FTOS image is expected to be a
Boot filename in the DHCP offer (128 bytes). The name can be
a fully qualified URL or it can be a file name only.
b When an FTOS image is found, the system compares that image to the version the chassis
currently has loaded.