Dell Force10 MXL Blade - Page 55

Management | 53
The configuration in Figure 4-1 creates privilege level 3. This level:
• removes the
resequence command from EXEC mode by requiring a minimum of privilege level 4
• moves the
capture bgp-pdu max-buffer-size command from EXEC Privilege to EXEC mode by requiring
a minimum privilege level 3, which is the configured level for VTY 0
• allows access to CONFIGURATION mode with the
banner command
• allows access to INTERFACE and LINE modes with the
no command
Allow access to INTERFACE, LINE, ROUTE-MAP,
and/or ROUTER mode. Specify all keywords in the
command.
privilege configure level level
{interface | line | route-map | router}
{command-keyword ||...||
command-keyword}
CONFIGURATION
Allow access to a CONFIGURATION, INTERFACE,
LINE, ROUTE-MAP, and/or ROUTER mode command.
privilege {configure |interface | line |
route-map | router} level level
{command ||...|| command}
CONFIGURATION
Task Command Syntax Command Mode