Dell PowerConnect B-RX - Page 1381

BigIron RX Series Configuration Guide 1305
53-1002253-01
Syslog messages
A
Notification OSPF nbr state changed, rid <router-id>, nbr
addr <ip-addr>, nbr rid <nbr-router-Id>, state
<ospf-state>
Indicates that the state of an OSPF neighbor
has changed.
The <router-id> is the router ID of the device.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• attempt
• initializing
• 2-way
• exchange start
• exchange
• loading
• full
• unknown
Notification OSPF virtual nbr state changed,
rid <router-id>, nbr addr <ip-addr>,
nbr rid <nbr-router-id>, state <ospf-state>
Indicates that the state of an OSPF virtual
neighbor has changed.
The <router-id> is the router ID of the device.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• attempt
• initializing
• 2-way
• exchange start
• exchange
• loading
• full
• unknown
TABLE 228 Brocade Syslog messages (Continued)
Message level Message Explanation