Dell PowerConnect B-RX - Page 1380

1304 BigIron RX Series Configuration Guide
53-1002253-01
Syslog messages
A
Notification OSPF interface state changed,
rid <router-id>, intf addr <ip-addr>,
state <ospf-state>
Indicates that the state of an OSPF interface
has changed.
The <router-id> is the router ID of the device.
The <ip-addr> is the interface’s IP address.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
Notification OSPF virtual intf state changed,
rid <router-id>, area <area-id>,
nbr <ip-addr>, state <ospf-state>
Indicates that the state of an OSPF virtual
routing interface has changed.
The <router-id> is the router ID of the router
the interface is on.
The <area-id> is the area the interface is in.
The <ip-addr> is the IP address of the OSPF
neighbor.
The <ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
TABLE 228 Brocade Syslog messages (Continued)
Message level Message Explanation