Delta VFD-VE - Gain for Analog Output 1; Gain for Analog Output 2 (Need to be Used with EMV-APP01); Analog Output 1 Value in REV Direction; Analog Output 2 Value in REV Direction

Chapter 4 Parameters
4-99
03-19  Gain for Analog Output 1 Unit: 0.1
03-22
 Gain for Analog Output 2 (need to be used with EMV-
APP01)
Unit: 0.1
03-25
 Gain for Analog Output 3 (need to be used with EMV-
APP01)
Unit: 0.1
Control
mode
VF VFPG SVC FOCPG TQCPG
Factory setting: 100.0
Settings 0 to 200.0%
 It is used to adjust the analog voltage level that terminal AFM outputs.
 This parameter is set the corresponding voltage of the analog output 0.
03-20  Analog Output 1 Value in REV Direction
03-23  Analog Output 2 Value in REV Direction
03-26  Analog Output 3 Value in REV Direction
Control
mode
VF VFPG SVC FOCPG TQCPG
Factory setting: 0
Settings 0 Absolute value in REV direction
1 Output 0V in REV direction
2 Enable output voltage in REV direction
03-18
03-21
03-24
03-20=0
03-23=0
03-26=0
03-20=1
03-23=1
03-26=1
10V(20mA
)
03-20=2
03-23=2
03-26=2
5V
(12mA)
10V(20mA
)
0V
(0mA)
10V(20mA
)
0V
(0mA)
Frequency
Frequency
Selections for the analog output direction