Digi TransPort LR54 - Page 100

Hotspot Hotspot configuration
Digi TransPort WR Routers User Guide
100
Command line
Note To view the default configuration prior to enabling the hotspot, type the hotspot command at
the command line with no parameters:
digi.router> hotspot
hotspot 1:
allowed-domains
allowed-subnets
auth-mode click-through
auth-port 3990
bandwidth-max-down 10000
bandwidth-max-up 10000
dhcp-lease 600
ip-address 10.1.0.1
lan lan2
local-page
local-shared-password
login local-page
mask 255.255.255.0
radius-nas-id hotspot
radius-secret
radius-server-port 1812
radius-server1
radius-server2
remote-url
server-port 4990
state on
swapoctets off
uamsecret
use-uamsecret off
digi.router>
1. Enable the hotspot:
digi.router> hotspot state on
2. Enable and add interfaces to the hotspot's default LAN (LAN2):
a. Enable the LAN:
digi.router> lan 2 state on
b. Add interfaces to the LAN:
digi.router> lan 2 interfaces wifi-ap2