Digi TransPort LR54 - Defroute

Command reference defroute
Digi TransPort WR Routers User Guide
364
defroute
Configures a default route.
Syntax
defroute <1 - 5> <parameter> <value>
Parameters
gateway
Gateway for this default route
Value should be an IPv4 address.
interface
Name of the interface to route packets
Accepted values can be one of none, lan1, lan2, lan3, lan4, lan5, lan6, lan7, lan8, lan9, lan10, dsl,
cellular1 or cellular2. The default value is none.
metric
Metric for this default static route
Accepted value is any integer from 0 to 255. The default value is 0.
Examples
n
defroute 1 interface cellular1
Set the default route to cellular1 (SIM1).
n
defroute 1 metric 1
Set the metric to 1 for defroute 1.
n
defroute 2 gateway 192.168.1.10
Set the default Ethernet gateway to 192.168.1.10.