Digi TransPort LR54 - GRE Page

Web reference GRE page
Digi TransPort WR Routers User Guide
293
GRE page
Use the GRE tunnel page to create or modify a GRE tunnel. You can configure up to 10 GRE tunnels.
Configuration options
Option Description
Enable Enables or disables the GRE tunnel. The default is disabled.
Description
Description for the GRE tunnel. Specify a string value up to 255 characters
long.
IP Address Specifies the IPv4address for the GRE tunnel.
Subnet Mask Specifies the subnet mask for the GRE IP address in IPv4 format.
Peer Specifies the remote peer address for the GRE tunnel in IPv4 format.
Key Specifies the key to use for the GRE tunnel, a 4-byte unsigned integer.
Specify an integer from 0 to 4294967295. The default is no key.
Status display
Option Description
Admin Status Shows the current administrative status: Up or Down.
Oper Status Shows the current operational status: Up or Down.
IP Address Shows the IPaddress for the GRE tunnel.
Subnet Mask
Shows the subnet mask for the GRE IP address.
Peer
Shows the IP address for the GRE peer.
Key Shows the key for the GRE tunnel.
Packets Shows the number of received and sent packets for the GRE tunnel.
Bytes
Shows the number of received and sent bytes for the GRE tunnel.