Web reference OpenVPN server page
Digi TransPort WR Routers User Guide
325
OpenVPN server page
Use the OpenVPN server page to configure and display an OpenVPN server.
Connection options
Option Description
Enable Enables or disables the OpenVPN server. The default is disabled.
Description Description for the OpenVPN server. Specify a string value up to 255 characters long.
Port Port number to which this OpenVPN server attempts to connect. Enter an integer
from 1 to 65535. The default is 1194.
Protocol Protocol that this OpenVPN server uses to connect: UDP or TCP. T Ihe default is
UDP.
Compression Compression algorithm this OpenVPN server uses to compress data channel
packets: off, lzo, or lz4. The default is off.
Logging
level
Specifies the level of output this OpenVPN server records in the system log. Specify
an integer from 0 to 4. The default is 0.
Network options
Option Description
Network If Bridge mode is disabled, specifies the IP address in IPv4 format of the local network
for this OpenVPN tunnel. The value typically ends with .0 to match the subnet mask.
Mask If Bridge mode is disabled, specifies the local subnet for this OpenVPN tunnel in IPv4
format. The default is 255.255.255.0.
Bridge
Mode
Specify a LAN as an Ethernet bridge (TAP) for this OpenVPN server or disable bridge
mode.
Note Although using bridge mode eliminates the need for routing between networks
(required by TUN mode), bridge mode can cause scalability issues since all broadcast
traffic flows over the OpenVPN tunnel.
The default is Off.
Topology Network topology this OpenVPN server uses to assign IP addresses to OpenVPN
clients. This value is used only if Bridge mode is disabled. Select one of the following
values: net30, p2p, or subnet. The default is net30.
Primary
DNS
IP address in IPv4 format of the primary DNS server. This value is pushed to OpenVPN
clients if Bridge mode is disabled.
Secondary
DNS
IP address in IPv4 format of the secondary DNS server. This value is pushed to
OpenVPN clients if Bridge mode is off.
To Next Page
Loading...
