Command reference analyzer
Digi TransPort WR Routers User Guide
351
analyzer
Configures the network packet capture feature. Enabling data traffic capture significantly affects
device performance.
Syntax
analyzer <parameter> <value>
Parameters
state
Enables or disables packet capture.
Accepted values can be one of off or on. The default value is off.
interfaces
The member interfaces for the packet capture operation. List the interfaces, separated by commas.
Accepted values can be multiple values of none, lan1, lan2, lan3, lan4, lan5, lan6, lan7, lan8, lan9, lan10,
eth1, eth2, eth3, eth4, wifi-ap1, wifi-ap2, wifi-ap3, wifi-ap4, wifi-ap5, wifi-ap6, wifi-ap7, wifi-ap8,
cellular1-sim1, cellular1-sim2, cellular2-sim1, cellular2-sim2, wifi-client1, wifi-client2 and lo. The
default value is none.
filter
The filter for capturing data packets, in BPF format. If you do not specify a filter, the capture operation
captures all incoming and outgoing packets.
Accepted value is any string up to 255 characters.
To Next Page
Loading...
